捷成建筑产品为太古城中心三期办公室提供综合隔墙和门系统

 

这项目是需要在横跨十层, 面积合共205, 000平方尺的甲级写字楼进行快速翻新工程。客户要求安装可拆式隔墙系统,务求工程于短期内完成及减低工程进行时对其他租户造成骚扰。捷成建筑产品有见及此, 为该项目提供按精确要求而定制的隔墙和门系统。

 

 

灵活布局带出效益

 

Unilock-Signature双层挂板隔墙(Bi-Block) 系统之所以被选用,是因为其预先组装模块能减低成本和缩短现场施工时间,更可免却繁复的泥水工序。该系统组件方便拆卸和转换,可快速重新配置,几乎适合使用于所有的办公室装饰工程。该系统是由钢板制成,板材能紧贴墙身踢脚板构成一个平整的表面,其独特的顶槽设计能确保安装时不会损坏天花板。挂板设计也可在看不到框架的情况下展示美观的面板效果。款式简单的Unilock可满足高素质及快速安装的要求。

 

 

可持续的物料

 

为实现绿化的目标, 这个翻新工程使用可持续的物料,如可再用的隔墙系统及来自可持续原料的建筑产品。相对于传统的石膏板隔墙, 可再用的隔墙系统大大减少资源浪费, 更换时更不会导致大量的噪音,灰尘和碎片。除了隔墙系统,在这办公室也安装了FSC认证木材制门。FSC 产销监管链(COC)证书确保认可森林生产的木材由其产出到终端使用的过程中均被追溯,以防止非认证材料在期间被取代。

 

 

完整的项目管理服务

 

捷成建筑产品除了与广受好评的建筑产品制造商有密切合作关系外,我们富有经验的销售和技术团队能为客户提供定制的解决方案。在项目的不同阶段进行协调和监督,及供应链管理。通过提供一系列针对隔墙和门而定制的解决方案,我们协助客户迎难而上, 顺利完成翻新工程。

 

The project was in need of quick-paced renovation of 205,000 square feet Grade-A office area across ten floors. A fast turnaround partitioning system was requested within the parameters of tight schedule and minimal site disturbance to other occupants during construction. With the challenges presented, Jebsen Building Products was able to deliver a customized partition and door system that satisfy the precise requirement on schedule.
Flexibility Creates Efficiency
The Unilock-Signature bi-block partition was selected as its pre-assembled modules helped save the cost and time of on-site work and avoided wet operation. The system is fully demountable and interchangeable, allowing quick relocation and reconfiguration that is suitable for almost all office interior requirements. The system is further enhanced by the steel panel that enables flush alignment with the wall skirting board creating a sleek appearance, as well as the unique head track fixing method that ensures no damage to ceiling tiles. The hung panel design also provides an aesthetically pleasing floating panel effect with no visible framing. Simple in style, but quick installation with quality.
Sustainable Renovation
Sustainable materials, such as reusable partition system and building products from sustainable sources were adopted in this renovation project in order to achieve the green objectives. The reusable partition system minimizes the waste of resources and enables change to occur with a minimum of noise, dirt and debris when compared to traditional drywall partition. Alongside the partition system, FSC certified timber doors were installed. The FSC Chain of Custody (CoC) certificate confirms timber produced in certified forests to be tracked all the way from the forest to the end use, preventing the possibility that non-certified material might be substituted at some stage.
Complete Project Management Services
In addition to the close partnership with the well-regarded building product manufacturers, Jebsen Building Products has offered the customized solution that are well supported by our team of experienced sales and technical staff. With the thorough project coordination and supervision, as well as supply chain management in different stages of the project, our team addressed the challenges by delivering a range of custom-made partition and door solution, matched to the exact requirements of the project.


显示更多

活动日程

邮件订阅

想了解我们更多的信息?
现在就点击订阅捷成捷报吧!

邮件订阅

覆盖区域

扫描二维码关注官方微信

微信号:Jebsen_Industrial

>
置顶